HUGO sweatshirt + hat set - Baby 6M/4Y - Paper Sewing Pattern
Customer Reviews
Based on 1 review
Write a review
Supplies needed :
|
Age |
6M | 12M | 18M | 24M | 3Y | 4Y | |
| Height (cm) | 67 | 74 | 81 | 86 | 98 | 104 | |
| Fabric 1 in 140cm | sweatshirt+hat | 45 | 50 | 50 | 55 | 60 | 65 |
| sweatshirt only | 40 | 40 | 45 | 50 | 50 | 60 | |
| hat only | 15 | 15 | 15 | 20 | 20 | 20 | |
| Lining in 140cm | sweatshirt+hat | 35 | 40 | 40 | 40 | 45 | 45 |
| sweatshirt only | 20 | 20 | 20 | 20 | 20 | 25 | |
| hat only | 25 | 25 | 25 | 25 | 25 | 30 | |
| Fox option | orange felt | 30*20 | 30*20 | 30*20 | 30*20 | 30*20 | 30*20 |
| off-white felt | 10*8 | 10*8 | 10*8 | 10*8 | 10*8 | 10*8 | |
| black felt | 5*3 | 5*3 | 5*3 | 5*3 | 5*3 | 5*3 | |
| Thin fusible interfacing | 20*15 | 20*15 | 20*15 | 20*15 | 25*15 | 25*20 | |
| Buttons (depending on options) | max 20mm wide | 0 to 6 | 0 to 6 | 0 to 6 | 0 to 6 | 0 to 6 | 0 to 6 |
| Optional zip | max length | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 |
Buttons or snap buttons up to 20 mm wide
Thin fusible interfacing to reinforce the parts with buttons
Optional : a non-separable zip for the front panel (zip with plastic or metallic teeth). Zip will have to be shortened down to reach the correct size; cut or remove teeth with pliers and replace the metal stop ring if there is one. Otherwise, stop down with lockstitches that are embroidered.
Decorative patches (fabric 3) : Felt (if it is woolen felt ... do not use a tumble dryer
For the zipped option, the head circumference is a little reduced. This version is not recommended for babies with "big heads".
The zip (about 10cm in haberdashery) is to be shortened by removing teeth or cutting.
What you will receive with this paper sewing pattern :
- The paper sewing pattern at real size for all ages together
- The A5 paper guidebook with all detailed steps